Potential for LCD clock, time pulled from network

src/main.rs

@@ -1,14 +1,47 @@
-use std::ffi::CString;
-use std::thread;
-use std::time::Duration;
-
 use esp_idf_svc::eth::{BlockingEth, EspEth, EthDriver, SpiEthChipset};
 use esp_idf_svc::eventloop::EspSystemEventLoop;
+use esp_idf_svc::hal::delay::Ets;
+use esp_idf_svc::hal::i2c::{I2cConfig, I2cDriver};
 use esp_idf_svc::hal::peripherals::Peripherals;
 use esp_idf_svc::hal::prelude::*;
 use esp_idf_svc::hal::spi::{config::DriverConfig, Dma, SpiDriver};
-use esp_idf_svc::handle::RawHandle; // brings .handle() into scope for EspNetif
+use esp_idf_svc::handle::RawHandle;
+use esp_idf_svc::sntp::{EspSntp, SyncStatus};
+use hd44780_driver::HD44780;
 use log::info;
+use std::ffi::CString;
+use std::thread;
+use std::time::{Duration, SystemTime, UNIX_EPOCH};
+
+// Row start addresses for 24x4 HD44780-compatible displays.
+// Common split, but NOT universal — check your display's datasheet.
+const ROW_ADDR: [u8; 4] = [0x00, 0x40, 0x18, 0x58];
+
+fn lcd_set_cursor(
+    lcd: &mut HD44780<impl hd44780_driver::bus::DataBus>,
+    row: u8,
+    col: u8,
+    delay: &mut Ets,
+) {
+    let addr = ROW_ADDR[row as usize] + col;
+    lcd.set_cursor_pos(addr, delay).ok();
+}
+
+fn lcd_print_line(
+    lcd: &mut HD44780<impl hd44780_driver::bus::DataBus>,
+    row: u8,
+    text: &str,
+    delay: &mut Ets,
+) {
+    lcd_set_cursor(lcd, row, 0, delay);
+    // pad/truncate to 24 chars so stale characters don't linger
+    let mut line = text.to_string();
+    line.truncate(24);
+    while line.len() < 24 {
+        line.push(' ');
+    }
+    lcd.write_str(&line, delay).ok();
+}
 
 fn main() -> anyhow::Result<()> {
     esp_idf_svc::sys::link_patches();
@@ -20,49 +53,93 @@ fn main() -> anyhow::Result<()> {
 
     let spi_driver = SpiDriver::new(
         peripherals.spi2,
-        pins.gpio13,       // SCLK
-        pins.gpio11,       // MOSI
-        Some(pins.gpio12), // MISO
+        pins.gpio13,
+        pins.gpio11,
+        Some(pins.gpio12),
         &DriverConfig {
-            dma: Dma::Auto(4096), // required — default (no DMA) can't move full ethernet frames
+            dma: Dma::Auto(4096),
             ..Default::default()
         },
     )?;
 
     let eth_driver = EthDriver::new_spi(
         spi_driver,
-        pins.gpio10,       // INT
-        Some(pins.gpio14), // CS
-        Some(pins.gpio9),  // RST
+        pins.gpio10,
+        Some(pins.gpio14),
+        Some(pins.gpio9),
         SpiEthChipset::W5500,
         20.MHz().into(),
-        Some(&[0x02, 0x00, 0x00, 0x12, 0x34, 0x56]), // locally-administered MAC
-        None,                                        // default PHY address
+        Some(&[0x02, 0x00, 0x00, 0x12, 0x34, 0x56]),
+        None,
         sysloop.clone(),
     )?;
-
     let eth = EspEth::wrap(eth_driver)?;
 
-    // Set hostname BEFORE starting — esp-idf-svc's safe NetifConfiguration has no
-    // hostname field, so this goes through the raw ESP-IDF binding. It must happen
-    // before eth.start(), otherwise it won't be included in the DHCP request and
-    // your router/OS will show a generic name instead (max 32 bytes).
     let hostname = CString::new("esp32-eth-device")?;
     unsafe {
         esp_idf_svc::sys::esp_netif_set_hostname(eth.netif().handle(), hostname.as_ptr());
     }
 
     let mut eth = BlockingEth::wrap(eth, sysloop)?;
-
     info!("Starting eth...");
     eth.start()?;
     info!("Waiting for DHCP lease...");
     eth.wait_netif_up()?;
-
     let ip_info = eth.eth().netif().get_ip_info()?;
     info!("Got IP: {:?}", ip_info);
 
+    // --- SNTP time sync ---
+    info!("Starting SNTP sync...");
+    let sntp = EspSntp::new_default()?;
+    while sntp.get_sync_status() != SyncStatus::Completed {
+        thread::sleep(Duration::from_millis(200));
+    }
+    info!("Time synced.");
+
+    // --- I2C LCD setup (SDA=GPIO17, SCL=GPIO16, adjust addr if needed) ---
+    let i2c_config = I2cConfig::new().baudrate(100.kHz().into());
+    let i2c = I2cDriver::new(peripherals.i2c0, pins.gpio17, pins.gpio16, &i2c_config)?;
+    let mut delay = Ets;
+    let mut lcd = HD44780::new_i2c(i2c, 0x27, &mut delay) // 0x27 is common PCF8574 default; some boards use 0x3F
+        .map_err(|_| anyhow::anyhow!("LCD init failed"))?;
+    lcd.reset(&mut delay).ok();
+    lcd.clear(&mut delay).ok();
+
     loop {
+        let now = SystemTime::now().duration_since(UNIX_EPOCH)?.as_secs();
+        let (date_str, time_str) = format_utc(now);
+
+        lcd_print_line(&mut lcd, 0, "ESP32-S3-ETH", &mut delay);
+        lcd_print_line(&mut lcd, 1, &date_str, &mut delay);
+        lcd_print_line(&mut lcd, 2, &time_str, &mut delay);
+        lcd_print_line(&mut lcd, 3, "", &mut delay);
+
         thread::sleep(Duration::from_secs(1));
     }
 }
+
+// Minimal UTC breakdown without pulling in chrono — good enough for display.
+fn format_utc(unix_secs: u64) -> (String, String) {
+    let days_since_epoch = unix_secs / 86400;
+    let secs_of_day = unix_secs % 86400;
+    let h = secs_of_day / 3600;
+    let m = (secs_of_day % 3600) / 60;
+    let s = secs_of_day % 60;
+
+    // Civil-from-days algorithm (Howard Hinnant), epoch = 1970-01-01
+    let z = days_since_epoch as i64 + 719468;
+    let era = if z >= 0 { z } else { z - 146096 } / 146097;
+    let doe = (z - era * 146097) as u64;
+    let yoe = (doe - doe / 1460 + doe / 36524 - doe / 146096) / 365;
+    let y = yoe as i64 + era * 400;
+    let doy = doe - (365 * yoe + yoe / 4 - yoe / 100);
+    let mp = (5 * doy + 2) / 153;
+    let d = doy - (153 * mp + 2) / 5 + 1;
+    let mth = if mp < 10 { mp + 3 } else { mp - 9 };
+    let y = if mth <= 2 { y + 1 } else { y };
+
+    (
+        format!("{:04}-{:02}-{:02} UTC", y, mth, d),
+        format!("{:02}:{:02}:{:02}", h, m, s),
+    )
+}