Jeff Luke
c1b2195834
Operator hub - Introduce Escape Gallery branding and Glitch: the Dark Machine room views - Add cabinet illustrations, Pac-Man marquee/gameplay artwork, and waiting states - Add device feedback panels with RFID readings, input/output states, and stale status - Add logged operator hardware interventions with request deduplication Room and cabinet authoring - Add a visual custom-PCB connection editor with per-cabinet device inventory - Support device IDs, bindings, wiring notes, input polarity, and validation - Add physical-room label/dimension toggles and editable doorway annotations - Preserve doorway changes through undo, save, and revert - Expand cabinet profiles, room layout, and Glitch scenario resources Scenarios and gameplay - Add per-assignment game configuration and runtime feature validation - Add timed test wins and Frogger individual-home objectives - Add the three-cabinet timed/score/Frogger test scenario - Add Cabinet 1 Pac-Man RFID credits, credit sound, and CREDIT 0/1 display - Require physical Start after an accepted scan and prevent duplicate credits Pi hardware and deployment - Add GPIO feedback sampling and a separate multiplexed RFID helper - Validate reader pin ownership and input/output conflicts - Add SSH cabinet startup and Pi desktop-session service support - Add master packaging, site setup, SSH enrollment, and staged cabinet releases - Verify deployment manifests and support explicit activation/status/log commands Documentation and verification - Consolidate the root README around the current architecture and setup workflow - Add the complete master/Pi/RFID export and deployment walkthrough - Document network isolation, credentials, card identification, and rollback - Add PCB, room-editor, feedback, credit, deployment, and controller tests - Isolate protocol tests from designer-edited cabinet configurations Known limitations - RFID helper compilation and physical Pi commissioning remain unverified - Fleet provisioning does not yet configure RFID-only installations completely - Broader Pac-Man tests retain a ghost-capture assertion failure - Staged exports must be rebuilt and checked before deploying runtime 2.3
99 lines
4.0 KiB
GDScript
99 lines
4.0 KiB
GDScript
extends SceneTree
|
|
|
|
var failures := 0
|
|
|
|
func check(condition: bool, message: String) -> void:
|
|
if not condition:
|
|
failures += 1
|
|
push_error(message)
|
|
|
|
func _initialize() -> void:
|
|
run.call_deferred()
|
|
|
|
func run() -> void:
|
|
if "--preview" in OS.get_cmdline_user_args():
|
|
root.gui_embed_subwindows = true
|
|
root.size = Vector2i(1200, 850)
|
|
var board := CabinetPCBConfig.new()
|
|
check(board.ports().size() == 22, "All 22 connectors must be present")
|
|
check(board.port("J15").bcm == 21 and board.port("J10").bcm == 5, "Three pin order")
|
|
check(board.port("J22").bcm == 25 and board.port("J17").bcm == 16, "Two pin order")
|
|
check(board.port("J2").label == "001" and board.port("J8").label == "111", "Reader selector order")
|
|
var reader := PCBConnection.new()
|
|
reader.port_id = "J1"
|
|
reader.device_type = "rfid"
|
|
reader.device_id = "reader_left"
|
|
reader.display_name = "Left RFID reader"
|
|
board.set_connection(reader)
|
|
var reader2: PCBConnection = reader.duplicate(true)
|
|
reader2.port_id = "J2"
|
|
reader2.device_id = "reader_right"
|
|
board.set_connection(reader2)
|
|
check(board.issues().is_empty(), "Valid readers")
|
|
var cabinet := CabinetProfile.new()
|
|
cabinet.display_name = "PCB editor test"
|
|
cabinet.pcb_config = board
|
|
var copy: CabinetProfile = cabinet.duplicate(true)
|
|
copy.pcb_config.connection("J1").display_name = "Other cabinet"
|
|
check(board.connection("J1").display_name == "Left RFID reader", "Cabinet deep-copy isolation")
|
|
var path := "user://pcb_test_roundtrip.tres"
|
|
check(ResourceSaver.save(cabinet, path) == OK, "Save cabinet")
|
|
var loaded := ResourceLoader.load(path, "", ResourceLoader.CACHE_MODE_IGNORE) as CabinetProfile
|
|
check(loaded.pcb_config.connection("J2").device_id == "reader_right", "Save/reload connector data")
|
|
DirAccess.remove_absolute(path)
|
|
reader2.device_id = reader.device_id
|
|
check(not board.issues().is_empty(), "Duplicate IDs reported")
|
|
reader2.device_id = "reader_right"
|
|
var hardware := HardwareConfig.new()
|
|
var action := HardwareAction.new()
|
|
action.action_id = &"lamp"
|
|
action.gpio_pin = 17
|
|
hardware.actions.append(action)
|
|
check(not board.issues(hardware).is_empty(), "Reserved selector pin reported")
|
|
var output := PCBConnection.new()
|
|
output.port_id = "J22"
|
|
output.device_type = "led"
|
|
output.device_id = "lamp"
|
|
output.binding_id = "lamp"
|
|
board.set_connection(output)
|
|
action.gpio_pin = 18
|
|
check(not board.issues(hardware).is_empty(), "Output BCM mismatch reported")
|
|
action.gpio_pin = 25
|
|
check(board.issues(hardware).is_empty(), "Matching output action accepted")
|
|
cabinet.hardware_config = hardware
|
|
if not Engine.is_editor_hint():
|
|
print("PCB resource tests: ", "PASS" if failures == 0 else "FAIL")
|
|
quit(failures)
|
|
return
|
|
var property := preload("res://editor/hardware/pcb_editor_property.gd").new()
|
|
root.add_child(property)
|
|
property.set_object_and_property(cabinet, "pcb_config")
|
|
property._update_property()
|
|
property._open()
|
|
property._select("J2")
|
|
check(property.device_id.text == "reader_right", "Editor selects correct reader")
|
|
property.device_name.text = "Pending edit"
|
|
property._store()
|
|
check(board.connection("J2").display_name != "Pending edit", "Draft cannot change source before Apply")
|
|
property.dialog.hide()
|
|
property._open()
|
|
check(property.device_name.text != "Pending edit", "Cancel/reopen discards draft")
|
|
property._select("J22")
|
|
property.device_name.text = "Reward lamp"
|
|
property._store()
|
|
property.property_changed.connect(func(_key: StringName, value: Variant, _field: StringName, _changing: bool): cabinet.pcb_config = value)
|
|
property._apply()
|
|
check(cabinet.pcb_config.connection("J22").display_name == "Reward lamp", "Apply emits updated configuration")
|
|
if "--preview" in OS.get_cmdline_user_args():
|
|
root.size = Vector2i(1200, 850)
|
|
property.dialog.popup_centered(Vector2i(1120, 760))
|
|
await process_frame
|
|
await process_frame
|
|
await RenderingServer.frame_post_draw
|
|
root.get_texture().get_image().save_png("user://pcb_editor_preview.png")
|
|
print("Preview: ", OS.get_user_data_dir(), "/pcb_editor_preview.png")
|
|
property.queue_free()
|
|
await process_frame
|
|
print("PCB tests: ", "PASS" if failures == 0 else "FAIL")
|
|
quit(failures)
|