wyatt/escape_gallery_obsidian_vault
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
5b0eaebd478e0c58bd84a078efef0296f6c3f399
escape_gallery_obsidian_vault/Projects/Odin/Odin's Dilemma Puzzle Wiring.md
T

8.7 KiB
Raw Blame History

active, tags, created
active tags created
false
project
2025-02-16 14:51

Goal

Finish the Odin's Dilemma Room.

  • Design an axe puzzle
  • Design compass puzzle

Tasks

Control Box

  • Put a 24V power supply on a board with cable➕ 2025-04-30 ✅ 2025-05-14
  • Install a 24V distribution block ➕ 2025-05-13 ✅ 2025-05-15
  • Install second rack ➕ 2025-05-13 ✅ 2025-05-15
  • Install the TPLink switch and remove the Ubiquiti one ➕ 2025-05-19 ✅ 2025-05-30
  • Install RPi in the server rack and connect to switch ➕ 2025-05-19 ✅ 2025-05-30
  • Drill extra holes in rack mounting plate ➕ 2025-05-30 ✅ 2025-05-31
  • Mount the RPi 4 onto the mounting plate with zip ties ➕ 2025-05-30 ✅ 2025-05-31
  • Flash controller RPi SD card ➕ 2025-05-13 ✅ 2025-05-31
  • Install 5V power for R1 RPi ➕ 2025-05-13 ✅ 2025-05-31
  • Install RPi 4 in rack ➕ 2025-05-14 ✅ 2025-05-31
  • [-] Make map of the room and figure out how many RPi's, GPIO, buck boards, etc. and create a spreadsheet ➕ 2025-04-30 ❌ 2025-06-23
  • Design a rack panel for 5 RPi 4s to mount onto ➕ 2025-05-30 ✅ 2026-02-04
  • Send rack panel design to SentCutSend ➕ 2025-05-29 ✅ 2026-02-04
  • Install nftables and configure ➕ 2025-05-30 ✅ 2026-02-04
  • Install dnsmasq and configure ➕ 2025-05-30 ✅ 2026-02-04
  • Create setup script ➕ 2025-05-30 ✅ 2026-02-04
  • Install NATS and configure ➕ 2025-05-15 ✅ 2026-02-04

Timers

  • Install RPi Zero for the ship control LED's ➕ 2025-06-02 ✅ 2026-02-04
  • Add resistor to LED legs ➕ 2025-06-02 ✅ 2026-02-04
  • Wire up LED's to the GPIO board ➕ 2025-06-02 ✅ 2026-02-04
  • Make 5V torches from the flicker lights ➕ 2025-05-15 ✅ 2026-02-04
  • Install torches around the room ➕ 2025-05-15 ✅ 2026-02-04
  • Wire up and install torch controller ➕ 2025-05-15 ✅ 2026-02-04

Viking Ship Puzzle

  • Solder GPIO breakout board ➕ 2025-04-25 ✅ 2025-05-19
  • Wire up 5V power ➕ 2025-04-21 ✅ 2025-05-19
  • Flash SD card for odin-ship ➕ 2025-05-19 ✅ 2025-05-19
  • Create repo for odin-ship ➕ 2025-05-19 ✅ 2025-05-31
  • Test that GPIO board pins are reading correctly ➕ 2025-05-19 ✅ 2025-05-31
  • Wire up the magnetic switches to the GPIO board ➕ 2025-05-19 ✅ 2025-05-31
  • Solder board for the 12V solenoid and LED power ➕ 2025-05-19 ✅ 2025-05-31
  • Install MOSFET for the 12V power to solenoid ➕ 2025-05-19 ✅ 2025-05-31
  • Install MOSFET for the 12V power to LED's ➕ 2025-05-19 ✅ 2025-05-31
  • Connect power plug for solenoid and LED's ✅ 2025-05-31
  • Configure DHCP and DNS & disable WiFi ➕ 2025-05-19 ✅ 2026-02-04
  • Write control service for odin-ship ➕ 2025-05-19 ✅ 2026-02-04
  • Remove and install latches in the hidden cupboards and test manual opening ➕ 2025-04-21 ✅ 2026-02-04

Axe Puzzle

  • Configure network to use DHCP and DNS and disable WiFi ➕ 2025-06-23 ✅ 2026-02-04
  • Code service for the axe puzzle connected to NATS server ➕ 2025-04-29 ✅ 2026-02-04
  • Power up puzzle and test on the wall ➕ 2025-05-13 ✅ 2025-05-15
  • Solder GPIO breakout board ➕ 2025-03-06 ✅ 2025-05-02
  • Install LED's ➕ 2024-06-01 ✅ 2025-05-02
  • Install power and switches ➕ 2025-04-25 ✅ 2025-05-02
  • Install metal plate ➕ 2025-04-25 ✅ 2025-05-02

Horse Puzzle

  • Screw carvings to piece of live edge ➕ 2025-05-13 ✅ 2026-02-04
  • Attach to the wall with screws ➕ 2025-05-13 ✅ 2025-06-23
  • Hide screws ➕ 2025-05-13 ✅ 2025-06-23

Bird Puzzle

  • Screw carvings to piece of live edge ➕ 2025-05-13 ✅ 2026-02-04
  • Attach to the wall with screws ➕ 2025-05-13 ✅ 2026-02-04
  • Hide screws ➕ 2025-05-13 ✅ 2026-02-04

Bear Puzzle

  • Screw carvings to piece of live edge ➕ 2025-05-13 ✅ 2026-02-04
  • Attach to the wall with screws ➕ 2025-05-13 ✅ 2026-02-04
  • Hide screws ➕ 2025-05-13 ✅ 2026-02-04

Fish Puzzle

  • Screw to piece of live edge ➕ 2025-05-13 ✅ 2026-02-04
  • Attach to the wall with screws ➕ 2025-05-13 ✅ 2026-02-04
  • Hide screws ➕ 2025-05-13 ✅ 2026-02-04

Throne Room Puzzle

  • Install chain in wolf head shield ➕ 2025-04-21 ✅ 2025-05-13
  • Install wolf head ➕ 2025-04-22 ✅ 2025-05-13
  • Cut out eyes ➕ 2025-05-13 ✅ 2026-02-04
  • Make molds for eyes ➕ 2025-05-13 ✅ 2026-02-04
  • Put elastic in the chain to help it open more softly ➕ 2025-05-15 ✅ 2026-02-04
  • Make epoxy eyes with LED's in ➕ 2025-05-13 ✅ 2026-02-04
  • Install latch to make door open ➕ 2025-05-15 ✅ 2026-02-04
  • Wire up LED's and latch ➕ 2025-05-13 ✅ 2026-02-04

Shields Decoration

  • Create wedges to angle the shields ➕ 2025-05-15 ✅ 2026-02-04
  • Use existing center screw slots to attach shield to wedge and beam ➕ 2025-05-15 ✅ 2026-02-04

Table Puzzle

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Oar Barrel

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Chests

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Game Barrel

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Maze Bucket

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Horn Barrel

  • Attach to sub-floor with screws ➕ 2025-05-15 ✅ 2026-02-04

Antlers

  • Pre-mount skulls on a piece of live edge ➕ 2025-05-15 ✅ 2025-05-15
  • Attach live edge to the wall ➕ 2025-05-15 ✅ 2025-05-15

Chandelier

  • Hang from the ceiling on cross brace ➕ 2025-05-15 ✅ 2026-02-04
  • Install wire for knife reward ➕ 2025-05-15 ✅ 2026-02-04
  • Install latch for knife reward ➕ 2025-05-15 ✅ 2026-02-04

Nets and Ropes

  • Screw anchor points to wall and attach ➕ 2025-05-15 ✅ 2026-02-04
  • Hide screws ➕ 2025-05-15 ✅ 2026-02-04

Mímir Clue System

  • Mount on rope ➕ 2025-05-19 ✅ 2026-02-04
  • Hang from a hook on the wall ➕ 2025-05-19 ✅ 2026-02-04
  • Run wires through rope ➕ 2025-05-19 ✅ 2026-02-04
  • Light up eye with multi-color LED ➕ 2025-05-19 ✅ 2026-02-04
  • Install speaker in head ➕ 2025-05-19 ✅ 2026-02-04

Dragon Heads

  • Install green LED's in eyes in dragon heads ➕ 2024-06-01 ✅ 2025-10-25
  • Bolt to the head to the beam, or the wall above it ➕ 2025-05-15 ✅ 2026-02-04
  • Install RFID readers with resin in dragons heads ➕ 2024-06-01 ✅ 2025-10-25
  • Install latch on spear cabinet ➕ 2025-05-15 ✅ 2026-02-04
  • Make the spear cabinet ➕ 2025-04-06 ✅ 2025-04-12
  • Install spear cabinet with latch and wire ➕ 2025-04-12 ✅ 2025-04-25

Helm Puzzle

  • Create shelves for Berserker heads ➕ 2025-05-19 ✅ 2026-02-04
  • Install electronics and controller for the heads ➕ 2025-05-15 ✅ 2026-02-04
  • Screw the heads from the underside to the pedestal ➕ 2025-05-15 ✅ 2026-02-04
  • Create control software ➕ 2025-05-19 ✅ 2026-02-04

Hammer Puzzle

  • 3D print a larger hand ➕ 2025-05-15 ✅ 2026-02-04
  • Screw to live edge board and mount ➕ 2025-05-15 ✅ 2026-02-04
  • Install electronics for the hand ➕ 2025-05-15 ✅ 2026-02-04

Drum Puzzle

  • Make a frame around the drums ➕ 2025-05-19 ✅ 2026-02-04
  • Drill holes for foliage ➕ 2025-05-19 ✅ 2026-02-04
  • Screw drums to the floor ➕ 2025-05-15\ ✅ 2026-02-04
  • Wire the tree of life with LED's ➕ 2025-05-19 ✅ 2026-02-04
  • Wire up and install drum controller ➕ 2025-05-15 ✅ 2026-02-04
  • Run wires to the tree to power LED's ➕ 2025-05-19 ✅ 2026-02-04
  • Make LED's in tree flash in pattern ➕ 2025-05-19 ✅ 2026-02-04
  • Screw solid frame of the picture to the wall ➕ 2025-05-15 ✅ 2026-02-04
  • Install LED's in the back of the tree ➕ 2025-05-15 ✅ 2026-02-04
  • Put a blue sky image on the back of the tree ➕ 2025-05-15 ✅ 2026-02-04

Knocker Puzzle

  • Make false wall with a panel in it ➕ 2025-05-15 ✅ 2025-05-15
  • Install latch in the door ➕ 2025-05-15 ✅ 2026-02-04
  • Install spring mechanism to open the door ➕ 2025-05-19 ✅ 2026-02-04
  • Install in the wall ➕ 2025-05-19 ✅ 2026-02-04
  • Run wires to the puzzle controller ➕ 2025-05-19 ✅ 2026-02-04

References

Reference in new issue View Git Blame Copy Permalink